Element Switch WP9758060

Technical specifications: 

• Part type: Unlimited control switch (Infinite Switch).

• Technical function: It acts as an operating cycle controller (Duty Cycle) for the heater; It opens and closes the electrical circuit periodically to adjust the average temperature.

• Operating system: It is based on an internal "bimetallic" (Bi-metal) element that expands and contracts due to heat generated by an internal resistance, opening and closing the contact points.

• Electrical compatibility: Designed to withstand voltage (120-240V) and current capacity compatible with standard stove eyes (6 or 8 inches).

• Connection points: It has several terminals (P1, P2, H1, H2, L1, L2) for power transmission and control.

How to use and maintain

1. Part safety test:

• Continuity check: After turning off the power, use the Multimeter (Multimeter) to bell or resistor mode.

• experimentation: A reading should appear when the switch is turned on (closed mode), and no reading should appear when turned off (OFF). If the circuit is always closed or always open, the switch is faulty.

2. Installation instructions:

• Safety: Disconnect the power from the main breaker of the stove.

• Verification: Take a clear picture of the wire arrangement before removing it from the old switch, as different arrangement of the ends can cause a short circuit or the eye to operate at maximum temperature without control.

• Fixation of limbs: Make sure that the "fishes" (Terminal Connectors) fit tightly into the ends of the new switch. If the plug is loose or charred, it must be cut and a new plug installed to ensure no electrical spark occurs.

• Ensure installation: Make sure the switch body is securely screwed to the control panel to prevent vibration or movement of the wires with use.