CH3200 SUPCO ELEMENT 316203200 MAXICO

Technical specifications:

• Function: Generating the heat needed for baking processes (Bake) inside the oven.

• Compatibility: Compatible with a wide range of ovens Frigidaire، Electrolux، and Kenmore which uses the number 316203200.

• Design: Durable metal heating coil mounted on a support frame, designed to ensure balanced heat distribution within the furnace chamber.

• source: manufactured to identical standards to the original to ensure efficiency and safety.

How to use and maintain

• Mechanism of action: When the oven is set to "baking" (Bake) mode, electrical current passes through the heater, glowing and heating the surrounding air.

• When will the replacement take place?

  • Not heating: The oven does not heat up at all or heats up very slowly.

  • Optical damage: There is swelling, severe rust, or a "hole" in the heater wire (caused by corrosion or accumulation of burnt food).

  • Continuity check: When using a multimeter (Multimeter), if the circuit is "open" (no connection), it means that the inner wire of the heater is cut off and the piece must be replaced.

• Installation tips:

  1. Safety: The power must be disconnected from the oven (via the main breaker panel) before starting.

  2. Heater access: The heater is usually screwed to the back wall of the oven. Unscrew the screws and gently pull the heater to reveal the electrical connections behind it.

  3. Wire inspection: make sure the terminals (Terminals) are not charred or damaged by heat. If the connections are damaged, they must be repaired before installing the new heater to avoid an electrical short circuit.

  4. Cleaning: Do not use strong chemical cleaners on a new heater; it is designed to self-burn (self-clean) or clean with just a dry wipe.