WH2X1193 GE NUT HUB

 Technical specifications: 

• Type: Heavy-duty mechanical mounting nut with reverse or standard tooth draft (depends on direction of rotation to prevent self-disintegration).
• Manufactured material: Carbon heat-treated alloy steel (Carbon Steel Alloy) is very hard and coated with a coating resistant to rust and chemical corrosion caused by water, powders and bleaches.
• Approximate technical dimensions:
  • Total outer diameter: approx 2 inches (5 cm).
  • Inner diameter (tooth canal): about 1.25 inches (3.17 cm).

• Mechanical installation location: It is mounted at the bottom of the wash drum, specifically above the center navel (Drive Hub) to connect and secure the movable perforated wash drum with the rotating shaft emerging from the gearbox (Transmission Shaft).
• Compatible Alternatives Numbers: This nut is an official and direct replacement for previous factory maintenance codes: AP2045100 and 2502 and AH270921 and EA270921 and PS270921.

 common use 

• Fix the washing drum and prevent it from swaying: The only primary mechanical use of this nut is to seal the inner washing drum lock to the rotating shaft to prevent it from escaping or floating while filled with water, and to ensure its rotation with complete stability and high speed during the spinning stage.
• GE Classic Washing Machine Maintenance: Used as a pivotal spare part when disassembling and repairing top-loading washing machines (Top-Load) from the company General Electric (GE) And its affiliated brands such as Hotpoint (Hotpoint) and Kenmore (Kenmore).