WHX279640 IDLER PULLEY
60,00 SAR inclusive of value added tax (VAT
Technical specifications:
-
Part type: Belt tension pulley (Idler Pulley Assembly).
-
Technical function: It provides the necessary pressure (Tension) to the motor drive belt (Drive Belt) in dryers or washers, ensuring continuous rotation without slipping.
-
Mechanism of action: It consists of a rotating pulley mounted on a spring arm (Spring-loaded arm). The spring pulls the pulley against the belt to maintain constant tension despite changes in rotation speed or belt expansion over time.
-
Material: Heavy duty reinforced plastic or metal with central ball bearing (Ball Bearing) to ensure silent and smooth rotation.
How to use and maintain
1. Part safety test:
-
Manual inspection: After disconnecting the power, move the pulley with your hand. It should rotate smoothly without "grinding" (Grinding) or friction sounds (indicating damage to the ball bearing).
-
Positioning check: Make sure the pulley is not tilted or oscillating; any tilt could cause the belt to slip off track (Belt slippage).
2. Installation instructions:
-
Safety: Completely disconnect the power from the device.
-
Remove belt: Release the pressure from the pulley to get the belt out of its path.
-
Pulley release: They are often secured with a single pivot screw or retaining ring (Snap ring). When disassembling, check the direction in which the spring attached to it is installed.
-
lubrication: If needed, use a very small amount of high heat grease on the center axle, and avoid any grease reaching the outer pulley surface (the place of contact with the belt) to prevent slipping.
-
alignment: When installing the new pulley, make sure it is completely parallel to the motor axis to ensure longer belt life.

Reviews
Clear filtersNo reviews yet.